Kia Optima: Traction Control System
On slippery road surfaces, the traction control system (TCS) limits the drive wheels from spinning excessively, thus helping the car to accelerate. It also provides improved driving force and steering performance as the car turns at accelerated speeds.
CAUTION
When the TCS indicator blinks, SLIP control function has been activated. It also means that the road is slippery or your car is accelerating excessively. In this situation, release foot pressure from the accelerator pedal and maintain moderate speed.
WARNING
Traction control is a driving aid; all normal precautions for driving in inclement weather and on slippery road surfaces should be observed.
To Reset at a Slower Speed
1. Press the COAST/SET switch and hold it. While the switch is pressed, the vehicle
speed will gradually decrease.
2. When the desired speed is obtained, release the COAST/SET switch.
✽ N ...
TCS ON/OFF MODE
In the TCS ON mode, the indicator in the instrument cluster will not be illuminated.
The indicator will illuminate when the ignition key is turned to the “ON” position,
but should go off after ...
See also:
Installing a Child Restraint System in the Front Seat and Rear Outboard Seats
1. Place the child restraint system in the seat and route the lap/shoulder belt
around or through the restraint, following the restraint manufacturer’s instructions.
Be sure the safety belt we ...
Troubleshooting
Symption
Suspect area
Remedy
Engine misfire with abnormal internal lower engine noises.
Worn crankshaft bearings
Loose or out of s ...
Inspection
1.
Ignition "OFF"
2.
Disconnect the connector of temperature
control actuator.
3.
Verify that the temperature control
actuator operates to t ...
Categories
Kia Optima Manuals
- Kia Optima DL3 2019-2026 Owners Manual
- Kia Optima DL3 2019-2026 Service and Repair Manual
- Kia Optima TF 2011-{2019} Owners Manual
- Kia Optima TF 2011-2026 Service Manual
- Kia Optima MS/Magentis 2000-2005 Owners Manual
