The TCS indicator will
illuminate when the ignition key is turned to the “ON” position, but should go off
after 3 seconds. It means the TCS is in the stand-by status and at the moment of
the actual operation of the TCS, the indicator will blink.
Press the TCS switch, then the system will be deactivated and the TCS indicator will illuminate.
If the TCS indicator stays on in the TCS ON mode, take your car to your Authorized Kia Dealer and have the system checked.
Checking the Manual Transaxle Oil Level
1. Raise and suitably support the vehicle.
WARNING - Lifting Your Vehicle
If you raise your vehicle, always ensure that it is supported at all four jacking
or lift points for the vehicle. Do ...
Replacement
1.
Disconnect the negative (-) battery
terminal.
2.
Remove the crash pad.(Refer
to BD group - “Crash Pad”)
3.
Loosen the screws and then remove
...
Line Pressure Control Solenoid Vale. Description and Operation
Description
Line pressure control solenoid valve is attached to the valve body. This variable
force solenoid valve directly controls the hydraulic pressure inside the line pressure.
...