Circuit Diagram
Removal and Installation
1.
Remove the engine cover.
2.
Disconnect the battery negative terminal (A).
Tightening torque
:4.0 ~ 6.0N.m (0.4 ~ 0.6kgf.m, 3.0 ~ 4.4lb-ft) ...
Power Out Side Mirror Switch. Repair procedures
Inspection
1.
Disconnect the negative (-) battery
terminal.
2.
Remove the front door trim panel.
(Refer to the BD group - "Front door")
3.
...
Inspection
Inspect Rotor
1.
Check that there is continuity between the slip rings
(C).
2.
Check that there is no continuity between the slip
...