As a reminder to the driver and passenger, safety belt warning light will blink for approximately 6 seconds each time you turn the ignition switch ON.
If the driver's lap/shoulder belt is not fastened when the key is turned ON or if it is unfastened after the key is turned ON, the safety belt warning light blinks for approximately 6 seconds and safety belt warning chime sounds for approximately 6 seconds.
Closing the fuel filler lid
1. To install the cap, turn it clockwise until it “clicks” one time. This indicates
that the cap is securely tightened.
2. Close the fuel filler lid and push it lightly and make sure that it is sec ...
Inspection
Remove the overhead console lamp assembly then check for continuity between terminals.
If the continuity is not as specified, replace the map lamp switch.
...
Components and Components Location
Components
1. Steering wheel
2. Steering column
3. ECU
4. Motor
5. Steering gear box
MDPS Circuit Diagram
Harness Connector
...