Kia Optima: Removal - Fuel Tank Air Filter. Repair procedures - Evaporative Emission Control 
		System - Emission Control System - Kia Optima TF 2011-2023 Service ManualKia Optima: Removal

1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2. Lift the vehicle.
3. Disconnect the canister close valve connector (A).
4. Disconnect the ventilation hose (B).
5. Remove the fuel tank air filter after removing 2 bolts (C).

6. Release the lever (A) and then rotate the canister close valve (B) in the direction of the arrow in figure.

7. Remove CCV from the fuel tank air filter after coinciding installation parts (A,B).

8. Replace new fuel tank air filter.


Fuel Tank Air Filter. Repair procedures
...

Installation
• Install the component with the specified torques. • Note tha ...

See also:

Disassembly
1. Using the special tool (09546-26000), compress the coil spring (A). Tightening torque:58.8 ~ 68.6N.m(6.0 ~ 7.0kgf.m, 43.4 ~ 50.6lb-ft) ...

Disassembly
1. Remove the snap ring (A). 2. Remove the hub assembly from the knuckle assembly. (1) Install the front knuckle assembly (A) on press. ...

Output Speed Sensor. Description and Operation
Description The output speed sensor is a vital unit that measures the rate of rotation of the transaxle's turbine shaft and output shaft, and delivers the readings to the TCM. The sensor prov ...

Copyright © www.kiopman.com 2023