Non-operational conditions of rear parking assist system
The rear parking assist system may not operate properly when:
1. Moisture is frozen to the sensor. (It will operate normally when the moisture
has been cleared.) 2. The sensor is covered with forei ...
Ignition switch position
LOCK
The steering wheel locks to protect against theft. (if equipped) The ignition
key can be removed only in the LOCK position.
When turning the ignition switch to the LOCK position, push the k ...
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the oil temperature
sensor connector.
3.
Measure resistance between sensor
signal terminal and sensor g ...