Kia Optima: Installation
| 1. |
Connect the audio unit connectors
and cables. |
| 2. |
Install the audio unit. |
| 3. |
Install the center fascia upper
panel. |
| 4. |
Install the heater control unit. |
| 5. |
Install the crash pad garnish
LH and instrument cluster fascia panel. |
| 6. |
Install the crash pad lower panel
and side cover. |
| 7. |
Install the crash pad garnish
RH.
|
Make sure the audio head unit connectors are plugged in properly
and the antenna cable is connected properly. |
|
1.
Reassemble the CD-rom drive to
the audio unit.
2.
Reassemble the top cover and
front panel.
...
See also:
Removal
1.
Disconnect the battery negative
cable, and wait for at least three minutes before beginning work.
2.
To remove the seat belt anchor
pretensioner (C), keep on push ...
Suspension System. Tires/Wheels. Wheel. Repair procedures
Hub nut tightening sequence
Tighten the hub nuts as follows.
Tightening torque:88.3 ~ 107.9N.m
(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
...
Fuses
A vehicle’s electrical system is protected
from electrical overload damage by
fuses.
This vehicle has 2 fuse panels, one located
in the driver’s side panel bolster, the
other in the e ...
Reassembly
