Kia Optima: Inspection

1.

Insert a thin stick (A) into the PCV valve (B) from the threaded side to check that there is the plunger movement.

If the plunger does not move (PCV valve is clogged), clean or replace the valve.

Removal

1. Disconnect the vapor hose (A). 2. Remove the PCV valve (B). ...

Installation

1. Installation is reverse of removal. PCV Valve installation: 1.9 ~ 2.8 N.m (0.19 ~ 0.29 kgf.m, 1.4 ~ 2.1 lb-ft) ...

See also:

General Safety Information and Caution
Precautions General Precautions Please read the following precautions carefully before performing the airbag system service. Observe the instructions described in this manual, or the ...

Replacement (With EPB)
Rear brake pads 1. Remove the rear wheel & tire. 2. Connect the GDS to the data link connector located underneath the dash panel. 3. Ignition "ON& ...

Oil Pump. Components and Components Location
Components 1. Reaction shaft support assembly 2. Oil pump housing 3. Driven gear 4. Drive gear 5. Oil seal 6. Bushing-Housing 7. Reaction shaft 8. Bushin ...

Categories

Kia Optima Manuals

Copyright © www.kiopman.com 2026