Kia Optima: Inspection
1. |
Turn the ignition switch OFF. |
2. |
Disconnect the RCV control solenoid valve connector. |
3. |
Measure resistance between the valve terminals 1
and 2. |
4. |
Check that the resistance is within the specification.
Specification:
Refer to “Specification”
|
|
1.
Turn the ignition switch OFF and disconnect the battery
negative (-) cable.
2.
Remove the RCV control solenoid valve (A) after disconnect
the connector, ...
See also:
Resetting The Panoramaroof
Whenever the vehicle battery is disconnected or discharged, or you use the emergency
handle to operate the panoramaroof, you have to reset your panoramaroof system as
follows :
1.
Turn th ...
Electric WGT Control Actuator. Components and Components Location
Components
1 . Housing
2 . Cover
3. Sealing Cover
4 . Motor
5. Pinion
6 . Shaft Gear
7 . PCB Assembly
8 . Middle Gear
9 . Lever
10 . Lever Pin
11 ...
Checking the brake/clutch* fluid
level
Check the fluid level in the reservoir periodically.
The fluid level should be
between MAX and MIN marks on the
side of the reservoir.
Before removing the reservoir cap and
adding brake/c ...