With the ENGINE START/STOP button in the ON position, pressing the heated steering wheel button warms the steering wheel. The indicator on the button will illuminate.
To turn the steering wheel off, press the button once again. The indicator on the button will turn off.
It will turn off automatically approximately 30 minutes after the heated steering wheel is turned on.
If you turn on the ignition again after turn off your engine in half an hour (after operating heater button), the heating system will be maintained in its 'on' condition.
CAUTION
Inspection
1.
Press the MODE switch more then
4 times within 2 seconds while pressing the OFF switch.
Display
Fail description
00
...
Inspection
TCM Problem Inspection Procedure
1.
TEST TCM GROUND CIRCUIT: Measure
resistance between TCM and chassis ground using the backside of TCM harness
connector as TCM side check point. If ...
For best battery service
Keep the battery securely mounted.
Keep the battery top clean and dry.
Keep the terminals and connections
clean, tight, and coated with petroleum
jelly or terminal grease.
Rinse any ...