The hazard warning flasher causes the rear tail lights and front turn signal lights to flash on and off, which serves as a warning to other drivers to exercise caution when approaching or passing your vehicle.
To activate the flasher, depress the hazard warning flasher switch. This switch operates in any ignition switch position.
To turn the flashers off, depress the switch again.
Jump Starting
Jump starting can be dangerous if done incorrectly. Therefore, to avoid harm
to yourself or damage to your vehicle or battery, follow the jump starting procedures
on this page. If in doubt, we str ...
Removal
•
Use fender covers to
avoid damaging painted surfaces.
•
To avoid damage, unplug
...
Removal
1.
Disconnect the negative(-) battery
terminal.
2.
Remove the front door trim panel.
(Refer to the BD group - "Front door")
3.
Remove the ...