Removal
1.
Disconnect the negative (-) battery
terminal.
2.
Loosen 2 screws holding the overhead
console (A).
3.
Disconnect the connectors of
sunr ...
Inspection
[Motor]
1.
Turn ignition switch OFF.
2.
Disconnect the EWGA connector.
3.
Check that the EWGA is stuck by foreign material.
...
Removal and Installation
1.
Disconnect the terminals from the battery.
Tightening torque
:(+) terminal (A) : 7.8 ~ 9.8N.m (0.8 ~ 1.0kgf.m,
5.8 ~ 7.2lb-ft)
(-) terminal (B) : 4.0 ...