Temperature Control Actuator Repair procedures
Inspection
1.
Ignition "OFF"
2.
Disconnect the connector of temperature control actuator.
3.
Verify that the temperature control actuator operates to the
hot position when connecting 12 ...
Auxiliary 12V Battery Repair procedures
Removal and Installation
1.
Disconnect the battery negative terminal (B) first, then the positive terminal (A).
Tightening torque :
(+) terminal (A) : 7.8 ~ 9.8N.m (0.8 ~ 1.0kgf.m, 5.8 ~ 7.2lb ...
TPMS Receiver. Description and Operation
Description
1.
Mode
(1)
Virgin State
A.
The receiver
as a sole part is shipped in this state. Replacement parts
should therefore arr ...