Kia Optima: TPMS Receiver Repair procedures - Tire Pressure Monitoring System - Suspension SystemKia Optima: TPMS Receiver Repair procedures

Replacement
   
   
When the receiver first arrives for replacement:
a.
It will be in Virgin State.
b.
It will not be configured for any specific platform.
c.
It will not have any sensor ID''s memorized.
   
   
It is important to make sure that the correct receiver is used to replace the faulty part i.e. it must be Low Line in order to have the correct inflation warning thresholds set.
1.
Disconnect vehicle battery.
2.
Remove the glove box.
(Refer to BD group - "Crash Pad")
3.
Remove faulty part and fit bracket assembly to new part.


4.
Secure new part to vehicle and fit connector.
5.
Re-connect battery and turn Ignition on.
Vechicle Name Writing

VIN Writing

VIN Writing

VIN Writing

VIN Writing


VIN Writing


TPMS Receiver Description and Operation
Operation 1. General Function • Auto-locate/learn takes place only once per Ignition cycle. • On successful completion, 4 road wheel sensor ID''s, together with their respe ...

Steering System
...

See also:

Refrigerant line Repair procedures
Replacement 1. Discharge refrigerant from refrigeration system. 2. Replace faulty tube or hose.     Cap the open fittings immediately to keep moisture or dirt out of ...

Overhead Console Lamp Repair procedures
Inspection Remove the overhead console lamp assembly then check for continuity between terminals. If the continuity is not as specified, replace the map lamp switch.Removal 1. Disconnect th ...

Inspection
1. Check that the red light flickers when the door lock or unlock button is pressed on the transmitter. 2. Remove the battery (A) and check voltage if the red light d ...

Copyright www.kiopman.com 2020