Kia Optima: TPMS Receiver Description and Operation - Tire Pressure Monitoring System - Suspension SystemKia Optima: TPMS Receiver Description and Operation

Description

It automatically searches the sensor location and learns new sensors.


It automatically searches the sensor location and learns new sensors.
It uses the sensor information, distance travelled, indistinct noise, automatic learning status, vehicle battery condition and inner receiver condition to determine whether there is defect in system or vehicle.
Mode
1.
Initial state
The receiver is a discrete part. Replaced parts must be in initial state.
Platform information and sensor ID are not entered.
2.
Normal operation states
To detect the tire pressure or DTC, the receiver must be in normal operating condition.
Verify the location and information of sensor through receiver.
TPMS Sensor Repair procedures
Removal Tire Removal 1. Deflate tire & remove balance weights.     • The tire bead should be broken approx. 90° from the valve side of the wheel. The bead ...

TPMS Receiver Schematic Diagrams
Circuit Diagram Connector pin number Pin NO.DiscriptionRemark1-2-3ECU battery terminal4-5CAN_High6CAN_Low7-8-9Ground10-11-12-13-14-15-16-17-18Ignition ON19-20- ...

See also:

ESC Control Module. Components and Components Location
Components 1. Front - left tube 2. Rear - right tube 3. Rear - left tube 4. Front - right tube 5. MC2 6. MC1 7. ESC control module(HECU) 8. Damper 9. Br ...

Noise and smoke
When the air bags inflate, they make a loud noise and they leave smoke and powder in the air inside of the vehicle. This is normal and is a result of the ignition of the air bag inflator. After th ...

Front Seat Repair procedures
Replaccement Seat Assembly Replacement 1. Remove the seat track mounting cover. 2. After loosening the seat assembly mounting bolts, remove the seat assembly (A). Tightening torque : 49.0 ...

Copyright www.kiopman.com 2021