Kia Optima: Torque Converter Control Solenoid Valve (T/CON_VFS). Specifications - Automatic Transaxle Control System - Automatic Transaxle System - Kia Optima TF 2011-2026 Service ManualKia Optima: Torque Converter Control Solenoid Valve (T/CON_VFS). Specifications

Specifications

Direct control VFS[T/CON]

▷ Control type : Normal low type

Control Pressure kpa(kgf/cm², psi)
9.81~500.14(0.1~5.1,1.42~72.54)
Current value(mA)
50~850
 Internal resistance(Ω)
5.1


Torque Converter Control Solenoid Valve (T/CON_VFS). Description and Operation
Description Torque converter control solenoid valve (T/CON_VFS) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the torque conver ...

Torque Converter Control Solenoid Valve (T/CON_VFS). Schematic Diagrams
Circuit Diagram ...

See also:

Inspection
Lighting Switch InspectionWith the multifunction switch in each position, make sure that continuity exists between the terminals below. If continuity is not as specified, replace the multi-functio ...

With central door lock switch (if equipped)
Driver's door Passenger’s door (if equipped) Operate by pressing the central door lock switch. Press the switch to the "Lock" position (1), all vehicle doors will lock. Pre ...

Inspection
1. Turn ignition switch OFF. 2. Disconnect the oil temperature sensor connector. 3. Measure resistance between sensor signal terminal and sensor g ...

Copyright www.kiopman.com 2026