Kia Optima: Suspension System. Tires/Wheels. Tire. Repair procedures
Tire wear
| 1. | Measure the tread depth of the
tires.
|
| 2. | If the remaining tread depth
(A) is less than the limit, replace the tire.
|
Rear Cross Member. Repair procedures
Replacement
1.
Remove the rear wheel & tire.
Tightening torque:88.3
~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
...
Suspension System. Tires/Wheels. Wheel. Repair procedures
Hub nut tightening sequence
Tighten the hub nuts as follows.
Tightening torque:88.3 ~ 107.9N.m
(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
...
See also:
Inspection (With GDS)
1.
Check BCM input/output specification
of multifunction switch using the GDS. If the specification is abnormal,
replace the lamp or wiper switch.
2.
If diagnosis is ...
Repair procedures
General Inspection
After or before servicing the EPS system, perform the troubleshooting and test procedure
as follows. Compare the system condition with normal condition in the table below
and i ...
Temperature control
The temperature control knob allows you to control the temperature of the air
flowing from the ventilation system. To change the air temperature in the passenger
compartment, turn the knob to th ...
Copyright © www.kiopman.com 2021