Kia Optima: SS-A Solenoid Valve (ON/OFF) Description and Operation - Automatic Transaxle Control System - Automatic Transaxle SystemKia Optima: SS-A Solenoid Valve (ON/OFF) Description and Operation

Description
The SS-A solenoid valve is attached to the valve body and is an SS-A solenoid valve that is used to change gears.


Overdrive Clutch Control Solenoid Valve (OD/C_VFS) Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Remove the air duct (A). Tightening torque: 7.8 ~ 9.8 N.m (0.8 ~ 1.0 kgf.m, 5.8 ~ 7.2 lb-ft) 3. Remove the air cleaner assembly. (1) D ...

SS-A Solenoid Valve (ON/OFF) Specifications
Specifications ON/OFF Solenoid Valve(SS-A, SS-B) Control type : Normal low type Control pressure kpa(kgf/cm?, psi)490.33 (5.0, 71.12) Internal resistance(?)10 ~ 11 ...

See also:

Oil Pump Uni t(OPU) Repair procedures
Removal 1. Disconnect the 12V battery negative (-) cable. 2. Remove the under cover (A). 3. Remove the wiring fixed clip at bracket after removing oil pump connector (A). Tightening t ...

Knock Sensor (KS) Description and Operation
Description Knocking is a phenomenon characterized by undesirable vibration and noise and can cause engine damage. Knock Sensor (KS) is installed on the cylinder block and senses engine knockin ...

Flow Diagram
Power Flow Chart P,N UD/B LR/B 26/B 35R/C OD/C OWC ● ...

Copyright © www.kiopman.com 2021