1. | Disconnect the negative (-) battery terminal. |
2. | Remove the crash pad. (Refer to BD group - “Crash Pad”) |
3. | Loosen the screws and then remove
the cluster ionizer (A).
|
4. | Installation is the reverse order of removal. |
Relay Box (Engine Compartment). Components and Components Location
Components
...
Fuse Replacement
WARNING - Fuse Replacement
Never replace a fuse with anything but another fuse of the same rating.
A higher capacity fuse could cause damage and possibly a fire.
Never install a wire inst ...
Installation
1.
Install the heater control unit.
2.
Install the center fascia lower
panel.
3.
Install the crash pad garnish.
...