Kia Optima: Repair procedures - Cylinder Block - Engine Mechanical System - Kia Optima TF 2011-2018 Service ManualKia Optima: Repair procedures

Components and Components Location
  1. Piston ring 2. Snap ring 3. Piston 4. Connecting rod 5. Connecting rod upper bearing 6. Piston pin 7. Connecting rod lower bearing 8. Connecting ...

Disassembly
Х Use fender covers to avoid damaging painted surfaces. Х To avoid damage, unplug ...

See also:

Mode Selection
Controls the direction of air flow through the ventilation system. The air from outlet port flows at any mode. Close the ventilation outlets using the knob to block the air flow if you do not wan ...

Armed stage
The Theft-Alarm system is armed as follows. Х After all doors, engine hood, and trunk are locked, press the УLOCKФ button on the transmitter once. The hazard flasher lights will flash once when t ...

Replacement (Without EPB)
Rear brake pads 1. Loosen the guide rod bolt (B) and pivot the caliper (A) up out of the way. Tightening torque:21.6 ~ 31.4 N.m (2.2 ~ 3.2 kgf.m, 15.9 ~ 23.1 lb-ft) ...

Copyright © www.kiopman.com 2018