Kia Optima: Repair procedures - Ignition Switch Assembly - Body Electrical System - Kia Optima TF 2011-2020 Service ManualKia Optima: Repair procedures

Ignition Switch Assembly
...

Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the driver crash pad lower panel.(Refer to the BD group - "Crash pad") 3. Rem ...

See also:

Console. Repair procedures
Replacement Floor Console Replacement [M/T] Х When prying with a flat-tip screwdriver, wrap it with p ...

Inspection
1. Check the signal waveform of the CMPS and CKPS using the GDS. Specification: Refer to УWave FormФ ...

Rear Wheel Speed Sensor Repair procedures
Removal 1. Remove the rear wheel and tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) 2. Remove the rear wheel speed sensor mounting bolt (A). Tightenin ...

Copyright © www.kiopman.com 2020