Kia Optima: Removal
|
The side airbag cannot be disassembled from the seat back assembly, so replace
the seat back assembly when replacing the side airbag. |
| 1. |
Disconnect the battery negative
cable and wait for at least 3 minutes before beginning work. |
| 2. |
Remove the front seat assembly.
(Refer to the Body group- Seat) |
| 3. |
Remove the seat back assembly.
(Refer to the Body group- Seat) |
Be sure to install the harness wires so they will not pinch or interfere
with other parts.
...
See also:
Muffler Repair procedures
Removal and Installation
1.
Remove the front muffler (A).
Tightening torque:
39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft)
2.
Remove the catalytic converter (A).
Tightening tor ...
Crankshaft Position Sensor (CKPS) Repair procedures
Inspection
1.
Check the signal waveform of the CMPS and CKPS using the GDS.
Specification: Refer to “Wave Form”
Removal
1.
Turn the ignition switch OFF and disconnect the battery n ...
Repair procedures
Adjustment
TCM Learning
When shift shock is occurred or parts related with the transaxle are replaced, TCM
learning should be performed.
In the following case, TCM learning is requir ...
Installation