Kia Optima: Overdrive Clutch Control Solenoid Valve(OD/C_VFS). Specifications - 35R Clutch Control Solenoid Valve(35R/C_VFS). Description and Operation - Automatic Transaxle System - Kia Optima TF 2011-2020 Service ManualKia Optima: Overdrive Clutch Control Solenoid Valve(OD/C_VFS). Specifications

Specifications

Direct control VFS[35R/C]

▷ Control type : Normal low type

Control Pressure kpa(kgf/cm², psi)
500.14~9.81(5.1~0.1,72.54~1.42)
Current value(mA)
50~850
 Internal resistance(Ω)
5.1


Overdrive Clutch Control Solenoid Valve(OD/C_VFS). Description and Operation
Description Overdrive clutch control solenoid valve(OD/C_VFS) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the overdrive clutc ...

Overdrive Clutch Control Solenoid Valve(OD/C_VFS). Schematic Diagrams
Circuit Diagram ...

See also:

Seat belt - Driver's 3-point system with emergency locking retractor
To fasten your seat belt: To fasten your seat belt, pull it out of the retractor and insert the metal tab (1) into the buckle (2). There will be an audible "click" when the tab locks in ...

SS-A Solenoid Valve(ON/OFF). Specifications
Specifications ON/OFF Solenoid Valve(SS-A, SS-B)▷ Control type : Normal low type Control pressure kpa(kgf/cm², psi) 490.33(5.0, 71.12)  Internal ...

Installation
1. Install the brake pedal assembly in dash panel. 2. Pre-tighten the bracket fixing bolt(B) in dash panel. 3. Install the brake boost ...

Copyright © www.kiopman.com 2020