Kia Optima: Manifold Absolute Pressure Sensor (MAPS). Specifications - Engine Control System - Engine Control/Fuel System - Kia Optima TF 2011-2020 Service ManualKia Optima: Manifold Absolute Pressure Sensor (MAPS). Specifications

Specification

Pressure
[kPa (kgf/cm², psi)]
Output Voltage (V)
20.0 (0.20, 2.9)
0.79
46.7 (0.47, 6.77)
1.84
101.3 (1.03, 14.7)
4.0


Manifold Absolute Pressure Sensor (MAPS). Description and Operation
Description Manifold Absolute Pressure Sensor (MAPS) is a speed-density type sensor and is installed on the surge tank. It senses absolute pressure of the surge tank and transfers the analog si ...

Manifold Absolute Pressure Sensor (MAPS). Schematic Diagrams
Circuit Diagram ...

See also:

Removal
Brake Booster 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the air duct (B) and air cleaner assembly (A). ...

Traction Control Indicator Lights
The TCS indicator will illuminate when the ignition key is turned to the УONФ position, but should go off after 3 seconds. It means the TCS is in the stand-by status and at the moment of the act ...

Immobilizer Control Unit. Repair procedures
Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to the BD group - "Crash pad") 3. ...

Copyright © www.kiopman.com 2020