Kia Optima: Line Pressure Control Solenoid Vale. Specifications - Automatic Transaxle Control System - Automatic Transaxle System - Kia Optima TF 2011-2021 Service ManualKia Optima: Line Pressure Control Solenoid Vale. Specifications

Specifications

Direct control VFS[LINE Pressure]

▷ Control type : Normal low type

Control Pressure kpa(kgf/cm², psi)
500.14~9.81(5.1~0.1,72.54~1.42)
Current value(mA)
50~850
 Internal resistance(Ω)
5.1


Line Pressure Control Solenoid Vale. Description and Operation
Description Line pressure control solenoid valve is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the line pressure. ...

Line Pressure Control Solenoid Vale. Schematic Diagrams
Circuit Diagram ...

See also:

Adjusting the Front Seatback Recliner
To change the seatback angle, lean forward slightly and raise the lever located on the outer portion of the seat. Slowly and carefully lean back to the desired angle and release the lever. After ...

Repair procedures
Inspection When the engine is shut off, the pressure change in the fuel tank by the ambient temperature is monitored by NVLD and when the engine is started, ECM judges whether there is a leak o ...

Panoramaroof Motor Repair procedures
Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the roof trim. (Refer to the BD group - "Roof trim") 3. Disconnect the panoramaroof motor (A) connector. 4. Grou ...

Copyright © www.kiopman.com 2021