Kia Optima: Installation
| 1. |
Reassemble the steering wheel
remote control switch after connecting the connector. |
| 2. |
Reassemble the steering wheel. |
| 3. |
Reassemble the driver airbag
module.
|
Make sure the hands free remote control switch and the airbag module
connectors are plugged in properly. |
|
1.
Disconnect the negative (-) battery
terminal.
2.
Remove the driver airbag module.
(Refer to the RT group)
3.
Remove the steering wheel.
(Refe ...
Inspection
1.
Disconnect the negative(-) battery
terminal.
2.
Remove the roof trim.(Refer
to the BD group - "Roof trim")
3.
Remove the ...
See also:
Removal and Installation
1.
Disconnect the ignition coil connectors (A).
2.
Remove the ignition coils (A).
Tightening torque
:3.9 ~ 5.9N.m (0.4 ~ 0.6kgf.m, 2. ...
Charging System Warning
This warning light indicates
a malfunction of either the generator or electrical charging system. If the warning
light illuminates while driving:
1. Drive to the nearest safe location and careful ...
Air Intake Control Switch
This is used to select fresh outside air or recirculation of the inside air.
WARNING
Continued climate control system operation in the recirculated air position
may allow humidity to incr ...