Kia Optima: Installation
AVN Head Unit
1. |
Connect the audio unit connectors
and cables. |
2. |
Install the AVN head unit. |
3. |
Install the center fascia upper
panel. |
4. |
Install the heater control unit. |
5. |
Install the crash pad garnish
LH and instrument cluster fascia panel. |
6. |
Install the crash pad lower panel
and side cover. |
7. |
Install the crash pad garnish
RH.
Make sure the AVN head unit connectors are plugged in properly and
the antenna cable is connected properly. |
|
Roof Antenna (GPS + SIRIUS)
1. |
Installation the roof antenna. |
2. |
Connect the GPS cable and SIRIUS
cable. |
3. |
Install the rear roof trim.
-
|
Make sure that
the cables and connectors are plugged in properly. |
|
|
AVN Head Unit
•
Take care not to scratch
the center fascia panel and related parts.
•
...
See also:
Operating door locks from inside the vehicle
With the door lock button
To unlock a door, push the door lock button (1) to the “Unlock” position.
The red mark (2) on the button will be visible.
To lock a door, push the door lock button ...
Removal
1.
Turn the ignition switch OFF and disconnect the battery
negative (-) cable.
2.
Release the residual pressure in fuel line (Refer
to “Release Residual Pre ...
High Voltage Shut-off Procedures
High Voltage Shut-off Procedures
Be sure to read and follow the “General Safety Information
and Caution” before doing any work related with the high voltage
sys ...