Kia Optima: Inspection - Timing Chain. Repair procedures - Timing System - Engine Mechanical System - Kia Optima TF 2011-2020 Service ManualKia Optima: Inspection

Sprockets, Chain Tensioner, Chain Guide, Chain Tensioner Arm

1. Check the camshaft sprocket and crankshaft sprocket for abnormal wear, cracks, or damage. Replace as necessary.
2. Inspect the tensioner arm and chain guide for abnormal wear, cracks, or damage. Replace as necessary.
3. Check that the tensioner piston moves smoothly when the ratchet pawl is released with thin rod.
Drive belt, Idler, Pulley
1. Check the idler for excessive oil leakage, abnormal rotation or vibration. Replace if necessary.
2. Check belt for maintenance and abnormal wear of V-ribbed part. Replace if necessary.
3. Check the pulleys for vibration in rotation, oil or dust deposit of V-ribbed part. Replace if necessary.

Removal
Х Use fender covers to avoid damaging painted surfaces. Х To avoid damage, unplug ...

Installation
1. Install the balance shaft chain. (Refer to Lubrication system in this group) 2. Install the crankshaft chain sprocket (B) and the timing chain oil jet (A). ...

See also:

Removal
In case of removing the high pressure fuel pump, high pressure fuel pipe, delivery pipe, and injector, there may be injury caused by ...

Windshield Wipers
The ignition switch must be ON. To turn the wipers on, move the lever down. INT Ц Intermittent wiper operation LO Ц Normal wiper speed HI Ц Fast wiper speed ...

Inflation Pressures
All tire pressures (including the spare) should be checked monthly when the tires are cold. УCold TiresФ means the vehicle has not been driven for at least three hours or driven less than one mile ...

Copyright © www.kiopman.com 2020