Kia Optima: Inspection - Steering Column and Shaft. Repair procedures - Electric Power Steering - Steering System - Kia Optima TF 2011-2020 Service ManualKia Optima: Inspection

1. Check the steering column for damage and deformation.
2. Check the joint bearing for damage and wear.
3. Check the tilt bracket for damage and cracks.
4. Check the key lock assembly for proper operation and replace it if necessary.

Disassembly
Universal joint assembly 1. Loosen the bolt (A) and then disconnect the universal joint assembly from the steering column assembly. 2. Reassembly is the reverse of ...

Steering Gear box. Components and Components Location
Components 1. Tie rod end 2. Lock nut 3. Bellows 4. Bellows band 5. Tie rod 6. Rack bar 7. Dust packing 8. Dust cap 9. Oil seal 10. Pinion plug ...

See also:

Inspection
TCM Problem Inspection Procedure 1. TEST TCM GROUND CIRCUIT: Measure resistance between TCM and chassis ground using the backside of TCM harness connector as TCM side check point. If ...

Overdrive Clutch Control Solenoid Valve(OD/C_VFS). Schematic Diagrams
Circuit Diagram ...

Inspection (With GDS)
1. Check BCM input/output specification of multifunction switch using the GDS. If the specification is abnormal, replace the lamp or wiper switch. 2. If diagnosis is ...

Copyright © www.kiopman.com 2020