Kia Optima: Inspection - Rear Lower Arm. Repair procedures - Rear Suspension System - Suspension System - Kia Optima TF 2011-2020 Service ManualKia Optima: Inspection

1. Check the bushing for wear and deterioration.
2. Check the rear lower arm for deformation.
3. Check the coil spring and spring pad for deterioration and deformation.
4. Check for all bolts and nut.

Removal
1. Remove the rear wheel & tire. Tightening torque:88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) ...

Rear Stabilizer Bar. Repair procedures
...

See also:

Inspection
Armature Inspection And Test 1. Remove the starter. 2. Disassemble the starter as shown at the beginning of this procedure. ...

Torque Converter Control Solenoid Valve (T/CON_VFS). Description and Operation
Description Torque converter control solenoid valve (T/CON_VFS) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the torque conver ...

Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the driver crash pad lower panel.(Refer to the BD group - "Crash pad") 3. Rem ...

Copyright © www.kiopman.com 2020