Kia Optima: Inspection
| 1. | Turn ignition switch OFF. |
| 2. | Disconnect the oil temperature sensor connector. |
| 3. | Measure resistance between sensor signal terminal and sensor ground terminal. |
| 4. | Check that the resistance is within the specification. |
Removal
Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional
hydraulic pressure adjustment; however, the hydraulic pre ...
See also:
Outside Rearview Mirrors Electric Remote Control
The electric remote control mirror switch, located on the left side of the instrument
panel on the drivers door, allows you to adjust the position of the left and right
outside rearview mirrors. ...
Installation
1.
Installation is the reverse of
removal.
2.
Perform the “Assembly check”
with GDS.
3.
Check that the brake operates
normally by pushing the EPB ...
System operation
Ventilation
1. Set the mode to the position.
2. Set the air intake control to the outside (fresh) air position. 3. Set the
temperature control to the desired position. 4. Set the fan speed contr ...
Copyright © www.kiopman.com 2020