Kia Optima: Input Speed Sensor Schematic Diagrams

Input Speed Sensor Specifications

Specifications Type: Hall effect sensor Operation condition (°C)°F((-)40 ~ 150)) -40 ~ 302Air gap(mm)in.(0.95~1.65) 0.037 ~ 0.065 Output voltage(V)High1.18 ~ 1.68Low0.59 ~ 0.84 ...

Input Speed Sensor Troubleshooting

Signal Waveform ...

See also:

License Lamp Repair procedures
Removal 1. Disconnect the negative(-) battery terminal. 2. Remove the license lamp (A) after pushing the pins fixed on the both side of license lamp. 3. Remove the bulb (B) by turning it c ...

Specifications
Specification Ignition System ItemsSpecificationIgnition coilPrimary resistance0.62 ± 10 % (?)Secondary resistance7.0 ± 15 % (k?)Spark plugsTypeFXU16HR11Gap1.0 ~ 1.1 mm (0.0394 ~ 0.0433 in.) ...

Seat belt - Driver's 3-point system with emergency locking retractor
To fasten your seat belt: To fasten your seat belt, pull it out of the retractor and insert the metal tab (1) into the buckle (2). There will be an audible "click" when the tab locks in ...