Kia Optima: Inhibitor Switch Specifications
| Specifications |
Type: Combination of output signals from 4 terminals
Specifications
| Power supply (V) | 12 |
| Output type | Combination of output signals |
Signal Code Table
| PIN No. | P | P-R | R | R-N | N | N-D | D |
| Signal "1" | 12V | 12V | 0 | 0 | 0 | 0 | 0 |
| Signal "2" | 0 | 12V | 12V | 12V | 0 | 0 | 0 |
| Signal "3" | 0 | 0 | 0 | 12V | 12V | 12V | 0 |
| Signal "4" | 0 | 0 | 0 | 0 | 0 | 12V | 12V |
Inhibitor Switch Description and Operation
Description
Inhibitor switch monitors the lever''s position (P,R,N,D) and is used to control gear setting signals.
...
Inhibitor Switch Schematic Diagrams
Circuit Diagram
...
See also:
Components and Components Location
Components Location
1. ECM (Engine Control Module)2. Manifold Absolute Pressure Sensor (MAPS)3. Intake Air Temperature Sensor (IATS)4. Engine Coolant Temperature Sensor (ECTS)5. Throttle Positio ...
CVVT Oil Control Valve (OCV). Description and Operation
Description
Continuous Variable Valve Timing (CVVT) system advances or
retards the valve timing of the intake and exhaust valve in accordance with
the ECM control signal which is calculated by ...
Keep belts clean and dry
Seat belts should be kept clean and dry. If belts become dirty, they can be cleaned
by using a mild soap solution and warm water. Bleach, dye, strong detergents or
abrasives should not be used bec ...
Copyright © www.kiopman.com 2021