1. If your vehicle has an automatic transaxle, be sure the shift lever is in N (Neutral) or P (Park) and the emergency brake is set.
2. Check the battery connections to be sure they are clean and tight.
3. Turn on the interior light. If the light dims or goes out when you operate the starter, the battery is discharged.
4. Check the starter connections to be sure they are securely tightened.
5. Do not push or pull the vehicle to start it. See instructions for "Jump starting".
Using RADIO, SETUP, VOLUME and AUDIO CONTROL
1. FM/AM Button The FM/AM button toggles between FM and AM. Listed below
are the paths as the system switches from FM to AM and back to FM.
• FM/AM : FM1➟FM2➟AM➟FM1...
2. PO ...
Schematic Diagrams
Circuit Diagram
Input/Output Specification
Connector Pin Lay Out
IMS input/output pin information
NoSignal NameI/OContentsRemarkA1---A2FR height motor upOFR height motor up outputA3RR height ...
SRS components and functions
The SRS consists of the following components:
1. Driver's front air bag module 2. Passenger's front air bag module 3. Side
impact air bag modules 4. Curtain air bag modules 5. Retractor p ...