Kia Optima: High Pressure Fuel Pump. Repair procedures

Installation

• Install the component with the specified torques. ...

Removal

In case of removing the high pressure fuel pump, high pressure fuel pipe, delivery pipe, and injector, there may be injury caused by ...

See also:

Transmitter Code Registration (Using Code Saver)
1. Open Door. 2. Connect POWER (B+) and GND, signal line of Code Saver. 3. If connection is normal, signal line is activated and RED LED turns ON. ...

Inspection
1. Check the bushing for wear and deterioration. 2. Check the rear lower arm for deformation. 3. Check the coil spring and spring pad for deterior ...

Replacement
1. Turn ignition switch OFF. 2. Disconnect the negative (-) battery cable. 3. Disconnect the TCM connector (A). 4. Re ...