1. | Be sure there is no play in the fuse holders, and that the fuses are held securely. |
2. | Are the fuse capacities for each circuit correct? |
3. | Are there any blown fuses? If a fuse is to be replaced, be sure to use a new fuse of the same capacity. Always determine why the fuse blew first and completely eliminate the problem before installing a new fuse. |
Replacement
Front brake pads
1.
Loosen the guide rod bolt (B)
and pivot the caliper (A) up out of the way.
Tightening torque:21.6
~ 31.4 N.m (2.2 ~ 3.2 kgf.m, 15.9 ~ 23.1 lb-ft)
...
Headlight High Beam Indicator
This indicator illuminates
when the headlights are on and in the high beam position or when the turn signal
lever is pulled into the Flash-to-Pass position. ...
To Reset at a Slower Speed
1. Press the COAST/SET switch and hold it. While the switch is pressed, the vehicle
speed will gradually decrease.
2. When the desired speed is obtained, release the COAST/SET switch.
✽ N ...