Kia Optima: Fuel Pump Repair procedures - Fuel Delivery System - Engine Control/Fuel SystemKia Optima: Fuel Pump Repair procedures

Removal
1.
Release the residual pressure in fuel line (Refer to “Release Residual Pressure in Fuel Line” in this group).
2.
Remove the fuel tank.
(Refer to "Fuel Tank" in this group)
3.
Disconnect the fuel tank pressure sensor & fuel pump connector (A).
4.
Remove the plate cover (B) after removing the installation bolt, and then remove the fuel pump from the fuel tank.

Installation

Installation


Installation
1.
Install in the reverse order of removal.

Fuel pump plate cover mounting bolt:
2.0 ~ 2.9 N.m (0.2 ~ 0.3 kgf.m, 1.4 ~ 2.2 lb-ft)

   
   
Be careful of fuel pump direction when installing (Refer to the groove in the fuel tank).
Fuel Line Repair procedures
Removal 1. Remove the fuel tank (Refer to “Fuel Tank”) 2. Disconnect the fuel feed tube (A). 3. Disconnect the vapor hose (A). 4. Disconnect the vapor hose quick-connector (A). ...

Fuel Filter Repair procedures
Replacement 1. Remove the fuel pump (Refer to “Fuel Pump” in this group). 2. Disconnect the electric pump wiring connector (A) and the fuel sender connector (B). 3. Remove the cushion ...

See also:

Noise and Smoke
When the air bags inflate, they make a loud noise and they leave smoke and powder in the air inside of the vehicle. This is normal and is a result of the ignition of the air bag inflator. After t ...

Special Service Tools
Special Service Tools Tools Name / NumberIllustrationDescription Engine support fixture 09200-3N000Removal and installation of the transaxle(? Permit operating with 09200-38001)Oil seal installe ...

Air bag non-inflation conditions
In certain low-speed collisions the air bags may not deploy. The air bags are designed not to deploy in such cases because they may not provide benefits beyond the protection of the seat belts ...

Copyright www.kiopman.com 2021