Kia Optima: Fuel filler lid

Closing the hood

1. Before closing the hood, check the following: All filler caps in engine compartment must be correctly installed. Gloves, rags or any other combustible material must be removed from the eng ...

Opening the fuel filler lid

The fuel filler lid must be opened from inside the vehicle by pushing the fuel filler lid opener button. ✽ NOTICE If the fuel filler lid will not open because ice has formed around it, ta ...

See also:

Disassembly
1. Using the special tool (09546-26000), compress the coil spring (A). Tightening torque:58.8 ~ 68.6N.m(6.0 ~ 7.0kgf.m, 43.4 ~ 50.6lb-ft) ...

SRS Control Module (SRSCM). Components and Components Location
Components ...

Reassembly
1. Wrap tape around the driveshaft spline(TJ) to prevent damage to the boots. 2. Apply grease to the joint boot on the side of the wheel and install the boot. ...