1. Remove the bolts from the headlight assembly.
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Turn the ignition switch ON.
3.
Measure the output voltage of the APS 1 and 2 at
C.T ...
General
1.
Basically, all measurements in
this manual are taken with a tracking gauge.
2.
When a measuring tape is used,
check to be sure there is no elongation, twisting or ...
Description and Operation
Description
Tread Lamp
-
Tire Under Inflation / Leak Warning.
1.
Turn on condition
A.
When tire pressure is
below allowed threshold
...