Kia Optima: Front Impact Sensor (FIS) Components and Components Location - SRSCM - RestraintKia Optima: Front Impact Sensor (FIS) Components and Components Location

Components


Front Impact Sensor (FIS) Description and Operation
Description The front impact sensor (FIS) is installed in the Front End Module (FEM). They are remote sensors that detect acceleration due to a collision at its mounting location. The primary p ...

Front Impact Sensor (FIS) Repair procedures
Removal     • Removal of the airbag must be performed according to the precautions/ procedures described previously. • Before disconnecting the front i ...

See also:

35R Clutch Control Solenoid Valve (35R/C_VFS) Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Remove the air duct (A). Tightening torque: 7.8 ~ 9.8 N.m (0.8 ~ 1.0 kgf.m, 5.8 ~ 7.2 lb-ft) 3. Remove the air cleaner assembly. (1) D ...

Inspection
Inspect Rotor 1. Check that there is continuity between the slip rings (C). 2. Check that there is no continuity between the slip ...

Disassembly
1. Remove the snap ring (A). 2. Remove the hub assembly from the knuckle assembly. (1) Install the front knuckle assembly (A) on press. ...

Copyright www.kiopman.com 2021