Kia Optima: Front Driveshaft. Components and Components Location

Driveshaft Assembly

...

Component location

1. Driveshaft (LH) 2. Driveshaft (RH) 1. Driveshaft (LH) 2. Circlip 3. Inner shaft bearing bracket assembly 4. Circlip 5. Driv ...

See also:

Inspection
1. Check the driveshaft boots for damage and deterioration. 2. Check the driveshaft spline for wear or damage. 3. Check that there is no water or ...

Removal
1. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 2. Remove the driver airbag module from the steering wheel after p ...

Installation
1. Installation is reverse of removal. Filler-neck assembly bracket installation bolt : 3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft) Filler-neck as ...