Kia Optima: Emergency starting

If engine turns over normally but does not start

1. Check fuel level. 2. With the ignition switch in the LOCK position, check all connectors at the ignition coil and spark plugs. Reconnect any that may be disconnected or loose. 3. Check th ...

Jump starting

Jump starting can be dangerous if done incorrectly. Therefore, to avoid harm to yourself or damage to your vehicle or battery, follow these jump starting procedures. If in doubt, we strongly r ...

See also:

Inspection
Check it by the procedure below to see if the function of the ECM is normal. 1. Turn the ignition key to the "ON" position. 2. Cover the front sensor to stop ...

Replacement (With EPB)
Rear brake pads 1. Remove the rear wheel & tire. 2. Connect the GDS to the data link connector located underneath the dash panel. 3. Ignition "ON& ...

Reprogramming a Single HomeLink Button
To program a device to HomeLink using a HomeLink button previously trained, follow these steps: 1. Press and hold the desired HomeLink button. Do not release until step 4 has been completed. 2. ...