Kia Optima: Disassembly - Camshaft. Repair procedures - Cylinder Head Assembly - Engine Mechanical System - Kia Optima TF 2011-2021 Service ManualKia Optima: Disassembly

1. Disassemble the CVVT assembly (A) and camshaft (B).

When removing the CVVT assembly bolt, prevent the camshaft from rotating by using a wrench.

Installation
1. Hold the timing chain, and place the intake CVVT & camshaft assembly. 2. Place the exhaust CVVT & camshaft assembly after releasing the ratchet of the timi ...

Reassembly
1. Reassemble the CVVT assembly (A) and camshaft (B). Tightening torque :53.9 ~ 63.7N.m (5.5 ~ 6.5kgf.m, 39.7 ~ 47.0lb-ft) ...

See also:

Condenser Repair procedures
Inspection 1. Check the condenser fins for clogging and damage. If clogged, clean them with water, and blow them with compressed air. If bent, gently bend them using a screwdriver or pliers. ...

Rear Parking Assist System Switch Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the smart junction box cover. 3. Remove the crash pad side switch assembly (A) as shown below picture.   ...

Fuel Pressure Test
1. Release the residual pressure in fuel line (Refer to “Release Residual Pressure in Fuel Line” in this group). ...

Copyright © www.kiopman.com 2021