The alarm will be deactivated when:
✽ NOTICE
If the ignition key is in the ignition switch, the transmitter will not function. Avoid trying to start the engine with the alarm activated.
Installation
1.
Install the overhead console
lamp after connecting the sunroof switch connector and lamp connector.
2.
Install the lens after tightening
2 screws.
...
Rear Seat Belt. Repair procedures
Replacement
Rear Seat Belt Replacement
•
When installing the belt,
make sure not to damage the retractor.
...
Installation
1.
Remove ignition key from the
vehicle.
2.
Disconnect the negative (-) cable
from battery and wait for at least three minutes.
3.
Install the ancho ...