Kia Optima: Clutch & Brake

Installation

1. Installation is the reverse of removal. After replacement or reinstallation procedure of the valve body assembly, ...

Description and Operation

Description The 6-spd automatic transaxle consists of an overdrive clutch (OD/C), a one-way clutch (OWC), a lower and reverse brake (LR/B), an underdrive brake (UD/B), a 26 brake (26/B), and a 35 ...

See also:

Inspection
1. Ignition "ON" 2. Using the scan tool. 3. Emit intensive light toward photo sensor using a lamp, and check the output voltage change. ...

Rail Pressure Sensor (RPS). Troubleshooting
Signal Waveform ...

Inspection
Armature Inspection And Test 1. Remove the starter. 2. Disassemble the starter as shown at the beginning of this procedure. ...