Kia Optima: Bright-Metal Maintenance
- To remove road tar and insects, use a tar remover, not a scraper or other sharp object.
- To protect the surfaces of bright-metal parts from corrosion, apply a coating of wax or chrome preservative and polish to a high luster.
- During winter weather or in coastal areas, cover the bright metal parts with a heavier coating of wax or preservative. If necessary, coat the parts with non-corrosive petroleum jelly or other protective compound.
Finish Damage Repair
Deep scratches or stone chips in the painted surface must be repaired promptly.
Exposed metal will quickly rust and may develop into a major repair expense.
✽ NOTICE
If your vehicle is dama ...
Underbody Maintenance
Corrosive materials used for ice and snow removal and dust control may collect
on the underbody. If these materials are not removed, accelerated rusting can occur
on underbody parts such as the fu ...
See also:
Front Impact Sensor (FIS). Description and Operation
Description
The front impact sensor (FIS) is installed in the Front End Module (FEM). They are
remote sensors that detect acceleration due to a collision at its mounting location.
The primary pur ...
Inflation Pressures
All tire pressures (including the spare) should be checked monthly when the tires
are cold. “Cold Tires” means the vehicle has not been driven for at least three
hours or driven less than one mile ...
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the injector connector.
3.
Measure resistance between the injector terminals
1 and 2.
...
Copyright © www.kiopman.com 2019