Kia Optima: Body Control Module (BCM). Repair procedures - BCM (Body Control Module) - Body Electrical System - Kia Optima TF 2011-2021 Service ManualKia Optima: Body Control Module (BCM). Repair procedures

Function
Wiper Control Washer Control Coupled With Wiper 1. Under IGN2 = ON, wiper LOW relay is turned ON after T2 from Washer switch ON if washer switch is ON for T1 and wipe ...

Trouble Diagnostics When Using GDS
1. The body control module can diagnose by using the GDS more quickly.The BCM communicates with the GDS and then reads the input/output value and drives the actuator. ...

See also:

Blind Spot Detection Unit Repair procedures
Removal Blind spot detection (BSD) unit 1. Disconnect the negative (-) battery.     Be careful when removing the blind spot detection unit. The bracket may break off fro ...

Components(Without EPB)
1. Guide rod bolt 2. Bleed screw 3. Caliper carrier 4. Caliper body 5. Inner pad shim 6. Brake pad 7. Pad retainer ...

ETC (Electronic Throttle Control) System Troubleshooting
Fail-Safe Mode ItemFail-SafeETC MotorThrottle valve stuck at 5°TPSTPS 1 faultReplace it with TPS 2TPS 2 faultReplace it with TPS 1TPS 1,2 faultThrottle valve stuck at 5°APSAPS 1 faultReplace it ...

Copyright www.kiopman.com 2021