Removal |
1. |
Remove the front bumper. (Refer to BD group - "Front bumper") |
2. |
Remove the headlamps. (Refer to BE group - "Headlamps") |
3. |
Remove the air guards (A). |
4. |
Unfasten the 2 bolts (A) and 2 fasteners (B). |
5. |
Disconnect the AAF (Active air flap) actuator connector (A). |
6. |
Remove the AAF (Active air flap) assembly (A). |
7. |
Installation is the reverse of removal. |
Disassembly |
1. |
Separate the duct (A) from the AAF (Active air flap) (B). |
2. |
Remove the actuator cover (A) from the housing (B). |
3. |
Remove the actuator (A) from the housing (B). |
4. |
Remove the link (A) and flaps (B) from the housing (C). |
5. |
Assembly is the reverse of disassembly. |
When assembling, the link and flaps should be in full open position. |
ETC (Electronic Throttle Control) System Description and Operation
Description
The Electronic Throttle Control (ETC) System consists of a
throttle body with an integrated control motor and throttle position
sensor (TPS). Instead of the traditional throttle cab ...
Inspection
Connecting Rod
1.
Check the connecting rod end
play.Using a feeler gauge, measure the end play while moving the connecting
rod back and forth.
End play :Standard : 0.10~ ...
Parking Assist Sensor. Components and Components Location
Component
...