In the OFF position, pull the lever gently toward you to spray washer fluid on the windshield and to run the wipers 2-3 cycles.
Use this function when the windshield is dirty. The spray and wiper operation will continue until you release the lever.
If the washer does not work, check the washer fluid level. If the fluid level is not sufficient, you will need to add an appropriate non-abrasive windshield washer fluid to the washer reservoir. The reservoir filler neck is located in the front driver’s side of the engine compartment.
WARNING
Do not use the washer in freezing temperatures without first warming the windshield with the defrosters; the washer solution could freeze on contact with the windshield and obscure your vision.
✽ NOTICE
To prevent possible damage to the washer pump, do not operate the washer when the fluid reservoir is empty.
How the Driver’s Air Bags (SRS) Work
The driver’s air bags are stored in the steering wheel hub. The passenger’s air
bag is stored in the dashboard above the glove box.
In certain frontal collisions, your air bags will instantly infla ...
Compact Spare Tire Replacement
A compact spare tire has a shorter tread life than a regular size tire. Replace
it when you can see the tread wear indicator bars on the tire. The replacement compact
spare tire should be the same ...
Impact sensing door unlock system (if equipped)
All doors will automatically unlock when an impact causes the air bags to deploy. ...