Inspection
1. | Remove the cowl top cover. (Refer to the wiper) |
2. | Disconnect the windshield deicer
connector (A) from the wiper motor linkage.
|
3. | Check for continuity between
the terminals of deicer lines.
|
4. | Turn the ignition switch ON and
the windshield deicer switch ON, then measure the voltage between the terminals
of harness side deicer connector.
|
Removal
Refer to "Accelerator Pedal" in this group.
...
Battery Saver Function
✽ NOTICE
The purpose of this feature is to prevent the battery from being discharged.
The system automatically turns off the small light when the driver removes the
ignition key and o ...
Special Tools
Use special tools when they are required.
...